The SES Disc wheel is the outright fastest rear wheel available. It is the culmination of nearly five years of development. During this process we considered not only aerodynamics but also rolling resistance, braking, and ride quality. The SES Disc is available as a tubeless clincher in both rim and disc brake models.
The SES Disc wheel is for elite and professional time trialists and triathletes who are looking for maximum efficiency for race courses where average speeds will exceed 27mph.
Beyond 27mph, at the high speeds experienced by professionals and the best amateur athletes, a rear disc wheel is the most aerodynamic solution. Every aspect of efficiency must be considered at these speeds, and we spared no expense in development.
Some will ask why it has taken so long for ENVE to develop a rear disc. Simply, we only wanted to make a disc that delivers a significant step forward in performance and ride quality over our flagship SES 7.8. We took our time to get it right.
To achieve the bar-raising performance of the SES Disc, we developed every aspect: aerodynamics, tubeless compatibility, construction, and braking. Like all SES products, the SES Disc was developed using state-of-the-art Computational Fluid Dynamics analysis by our long-term partner and consultant aerodynamicist, Simon Smart of Smart Aero Technology. Prototypes were assessed in the Mercedes-AMG Formula One wind tunnel and the subtle shape iterated to deliver class-leading aerodynamics at high race speeds.
ENVE Pump Adapter
Tubeless Kit:
-1x Valve Stems
-1x Tubeless Tape (good for taping 3 wheels)
-1x Pressure Relief Valve Stem Nuts
Valve Cover Decals 10-Pack
Titanium Skewer 100/135mm (QR only)
ENVE Black Brake Pads (rim models only)
Accessory Bag
Wheel Manual
Wheelbuild Card
Window Decal
ENVE SES 2.2, 3.4, 5.6, 7.8, 3.4 Disc, 5.6 Disc, 7.8 Disc, SES Rear Disc Wheel – There are no limitations on tire compatibility with these wheel models. Your ENVE SES wheels may be set up and run with inner-tubes and non-tubeless tires or tubeless (TL) and tubeless ready (TLR) tires alike. We recommend the use of a Tubeless (TL) or Tubeless Ready (TLR) 700x25c tire set up tubeless to maximize aerodynamics, rolling resistance, crosswind stability, and your ride experience.
Non-Tubeless Setup (i.e. I want to run inner-tubes) – Each ENVE SES wheelset is delivered with one roll of RED, model specific, ENVE tested and approved tubeless rim tape. This tape should be installed regardless of whether you intend to run your wheels tubeless or not. Do not run cloth or plastic (including ENVE) non-tubeless compatible rim tape or strips. Plastic rim strips and cloth tapes are too thick, bridge the drop-center rim channel, and will make installation and removal of tires extremely difficult. Click here for our tubeless tape installation video.
Cotton and/or Natural Fiber Sidewall Tires – ENVE does NOT RECOMMEND the use of cotton or natural fiber sidewall non-tubeless tires with ENVE SES wheelsets for EVERYDAY USE. These tires are intended for high-performance racing applications only. If you choose to run these tires, please inspect your tires after each ride for cuts, tears, and any signs of abrasion and/or wear in the sidewall and at the location of the rim/tire interface. If any wear and/or damage is identified, replace before riding. Riders who choose to run tires with cotton or natural fiber sidewalls do so at their own risk.
Non ci sono ancora contributi.