All of our wheels are built with a bladed spoke mated to our brass internal nipple. We use either Sapim CX Ray spokes for our builds, and wheels are built with uniform spokes. The one exception to this is our M930 wheel which is built DT Swiss Competition spokes or Sapim Force spokes. Spokes can be purchased through your local dealer. Spoke nipples and spoke nipple wrenches are available on ENVE.com.
Tech Note: To determine which spokes your wheel was built with, look at the spoke head at the hub flange. DT Swiss spokes are stamped with a “DT” and Sapim spokes are blank.
If you are building a wheel with one of our stock hubs, here is our spoke chart. This chart also contains rim ERD’s.
Tech Note: ENVE’s posted ERDs are already corrected for internal nipples.
Spoke Tensions for Road Wheels:
|Front Radial||Front Disc (NDS)
|Rear Drive (DS) 2X /3X||Rear Powertap Drive (DS) 2X|
|Road Wheels||80kgf- ENVE hub
95kgf- All other options
Spoke Tensions for Mountain Wheels:
|Front Disc (NDS) 2X||Rear Drive (DS) 2X|
Tech Note: Opposite side tensions will vary based on hub selection and necessary tensions to bring the wheel into dish