説明
革新的な新しさの、ディスクブレーキに特化したエアロ効果のあるトライアスロンおよびタイムトライアル用カーボンファイバー製ホイールセット。SES 7.8ディスクは、ディスクブレーキとの使用を目的に、空気力学的にも構造的にも最適化されています。
The best way to know WHY ENVE, is to ride a pair for yourself.
The ENVE Demo program allows you to ride ENVE on your own bike, on your own terms. Therefore, we invite you to put the ENVE wheelset of your choice through the paces and feel the ENVE difference in the real world.
革新的な新しさの、ディスクブレーキに特化したエアロ効果のあるトライアスロンおよびタイムトライアル用カーボンファイバー製ホイールセット。SES 7.8ディスクは、ディスクブレーキとの使用を目的に、空気力学的にも構造的にも最適化されています。
現代的なディスクブレーキを装備したエアロ効果のあるロードバイクやトライアスロン用バイクに乗るロードレーサーおよびトライアスリートは、SES 7.8ディスクの使用により、抗力の低減、軽量化、ロードバイク用大型タイヤ向けに最適化されたリム形状といった特徴から恩恵を得ることができます。
今日、現代的なロードバイクの多くはディスクブレーキを装備しており、将来、トライアスロン用のスーパーバイクもまたそうなることが予想されます。ブレーキ面を排除することで、空気力学的、構造的な可能性が開けます。ブレーキで生じる高温を制御するフラットなブレーキ面を作る必要がない場合、リムの重さを減らし、エアロ効果を上げるために形状を調整し、チューブレスタイヤのパフォーマンスを強化する、といったことが可能になります。
Tubeless Kit (Clincher only):
-2x valve stems
-1x roll of tape (good for taping 3 wheels)
-2x Pressure Relief Valve Stem Nuts
Valve Extenders (75mm set)
Skewers 100/135mm (QR only)
Accessory Bag
Wheel Manual
Wheelbuild Card
ディスクブレーキは、世界最高度のエアロ効果を持つバイクに搭載され始めており、SES 7.8はそれに対応する準備が整っています。ほとんどのホイールメーカーは、単にデカールでブレーキトラックをカバーし、ディスクハブとより多くのスポークを追加することで、リムブレーキを最適化したホイールをディスクブレーキホイールに再利用していますが、この方法では、かなりの性能がなおざりにされることになります。リム表面のブレーキ面での制約を取り除くことで、私たちはリムの形状、より具体的にはブレーキトラックエリアそのものを、始めから考案しなおすことができました。SES 7.8ディスクは、ディスクブレーキのために最適化された特許取得済みSESリム曲率を採用しています。また、SES 7.8ディスクのカーボンファイバー製クリンチャーとチューブラーは、熱制御のために使用される材料が排除されているため非常に軽量です。ブレーキ面のないリムは、より効率的なエアロ効果と優れた耐衝撃性を備えることが可能です。また、SES 7.8カーボンファイバー製クリンチャーは、チューブレスタイヤとの互換性があり、また、標準的なインナーチューブとタイヤともお使いいただけます。現世代のすべてのSESカーボンファイバー製クリンチャーとチューブラーと同様、SES 7.8ディスクは、高速の出る25mmタイヤを中心にエアロ効果が最適化されています。
ENVE SES 2.2, 3.4, 5.6, 7.8, 3.4 Disc, 5.6 Disc, 7.8 Disc, SES Rear Disc Wheel – There are no limitations on tire compatibility with these wheel models. Your ENVE SES wheels may be set up and run with inner-tubes and non-tubeless tires or tubeless (TL) and tubeless ready (TLR) tires alike. We recommend the use of a Tubeless (TL) or Tubeless Ready (TLR) 700x25c tire set up tubeless to maximize aerodynamics, rolling resistance, crosswind stability, and your ride experience.
Non-Tubeless Setup (i.e. I want to run inner-tubes) – Each ENVE SES wheelset is delivered with one roll of RED, model specific, ENVE tested and approved tubeless rim tape. This tape should be installed regardless of whether you intend to run your wheels tubeless or not. Do not run cloth or plastic (including ENVE) non-tubeless compatible rim tape or strips. Plastic rim strips and cloth tapes are too thick, bridge the drop-center rim channel, and will make installation and removal of tires extremely difficult. Click here for our tubeless tape installation video.
Cotton and/or Natural Fiber Sidewall Tires – ENVE does NOT RECOMMEND the use of cotton or natural fiber sidewall non-tubeless tires with ENVE SES wheelsets for EVERYDAY USE. These tires are intended for high-performance racing applications only. If you choose to run these tires, please inspect your tires after each ride for cuts, tears, and any signs of abrasion and/or wear in the sidewall and at the location of the rim/tire interface. If any wear and/or damage is identified, replace before riding. Riders who choose to run tires with cotton or natural fiber sidewalls do so at their own risk.
Clincher | Front | Rear | Wheelset |
---|---|---|---|
Rim Weight | 502g | 533g | 1035g |
ENVE Alloy | 754g | 909g | 1651g |
i9 Torch Road CL | 731g | 898g | 1628g |
King R45 CL | 755g | 906g | 1661g |
Rim Specs | Front | Rear |
---|---|---|
Rim Depth | 71mm | 78mm |
Internal Rim Width | 19mm | 19mm |
External Rim Width | 29mm | 27.5mm |
Hole Count | 24 | 24 |
Effective Rim Diameter | 516mm | 504mm |
Aero Optimized Tire Size | 25c | 25c |
Spoke Information* | Spoke Cross | Front Length (NDS/DS) | Rear Length (NDS/DS) |
---|---|---|---|
ENVE Alloy | 2X | 250mm / 252mm | 246mm / 244mm |
DT240 CL QR, 12mm, 15mm /142mm | 2X | 248mm / 250mm | 242mm / 240mm |
Chris King R45 CL | 2X | 246mm / 246mm | 240mm / 238mm |
Chris King R45 | 2X | 244mm / 246mm | 238mm / 236mm |
*This wheelset is built with Sapim CX Ray spokes. Those built before May 2018 may use a DT Swiss spoke equivalent. DT Swiss spoke heads are stamped "DT". |
Disc brakes are beginning to appear on the most aerodynamic bikes in the world and the SES 7.8 is ready. While most wheel manufacturers simply repurpose their rim brake optimized wheel models into disc brake wheels by covering brake tracks with decals and adding disc hubs and more spokes, this leaves substantial amounts of performance on the table. Removing the constraints of a braking surface on the rim allow us to completely rethink the shape of the rim and more specifically the brake track area itself. The SES 7.8 Disc features patented SES rim curvature that has been optimized for disc brakes. Additionally, the SES 7.8 Disc carbon fiber clinchers and tubulars are much lighter because the material used for heat management has been eliminated. With no braking surface, the rim can be made more aerodynamically efficient and impact resistant. Finally, the SES 7.8 carbon clincher is tubeless compatible and can also be run with standard inner tubes and tires. Like all of the current generation SES carbon clinchers and tubulars, the SES 7.8 Disc has been aerodynamically optimized around fast rolling 25mm tires.
Unfortunately you're using an unsupported browser version. For improved security, speed and the best experience please consider using the latest version of on the following browsers: Google Chrome, Firefox, Edge, Safari, or Opera.
There are no reviews with a 5-star rating yet