説明
これまでで最速の、スマート・エンヴィ・システム搭載カーボンファイバー製エアロホイール。
The best way to know WHY ENVE, is to ride a pair for yourself.
The ENVE Demo program allows you to ride ENVE on your own bike, on your own terms. Therefore, we invite you to put the ENVE wheelset of your choice through the paces and feel the ENVE difference in the real world.
これまでで最速の、スマート・エンヴィ・システム搭載カーボンファイバー製エアロホイール。
最大のエアロ効果と安定性を求める経験豊富なトライアスリートとロードレーサー。
SES 7.8は、より高い速度と安定性という2つの要素を目標に作られました。SES 7.8は、最新のSES技術を体現する製品で、当社最新のモールド成形ブレーキトラックを装備し、チューブレスクリンチャータイヤとの互換性があります。SES 7.8はより幅広くなっており、現代的なエアロフレームと大型の25mmタイヤを使用した場合に最大の効果を発揮するよう作られています。
Tubeless Kit (Clincher only):
-2x valve stems
-1x roll of tape (good for taping 3 wheels)
-2x Pressure Relief Valve Stem Nuts
Skewers 100/130mm
Brake pads 10mm (SRAM/Shimano or Campy)
Brake pads 8mm (SRAM/Shimano)
Valve Extenders (75mm set)
Accessory Bag
Wheel Manual
Wheelbuild Card
レースが向かい風を受けたタイムレースの場合、SES 7.8は、その状況に最もふさわしい製品です。エアロ効果、安定性、軽さ、剛性という強みをできるだけトレードオフせずに確保したSES 7.8カーボンファイバー製エアロホイールは、ロードレースとトライアスロン向きの完璧なツールとなっています。SES 7.8は、リムの形状がフロントとリアで異なっています。フロントはリム高さ71mm、幅29mm。リアは、リム高さ80mm、幅27.5mm。リム形状が前後で異なっていることは、バイクフレームとホイールからなるこのシステムにおいて、エアフローの効率が改善されていることを証明しています。現在、25mm幅のタイヤが標準的なものとなっていることから、SES 7.8は、より大型のタイヤを想定して設計されています。また、フレームメーカーは現在、ホイールとフレーム間によりすき間のあるフレームを作るようになっているため、ホイールセットにデザイン面での可能性が開けました。SES 7.8は、こうしたフレームに最適化した製品となっています。形状および構造の変更に加え、SES 7.8は、最新の粗い質感のあるモールド成形ブレーキトラックを搭載しており、ロードバイク用チューブレスタイヤとも互換性があります。SES 7.8は、エンヴィのカーボンファイバー製ロードバイク用ハブを組み込んだ場合、重量が1562グラムとなり、平地から丘陵地までカバーするコースでの現実味のあるチョイスとなっています。
ENVE SES 2.2, 3.4, 5.6, 7.8, 3.4 Disc, 5.6 Disc, 7.8 Disc, SES Rear Disc Wheel – There are no limitations on tire compatibility with these wheel models. Your ENVE SES wheels may be set up and run with inner-tubes and non-tubeless tires or tubeless (TL) and tubeless ready (TLR) tires alike. We recommend the use of a Tubeless (TL) or Tubeless Ready (TLR) 700x25c tire set up tubeless to maximize aerodynamics, rolling resistance, crosswind stability, and your ride experience.
Non-Tubeless Setup (i.e. I want to run inner-tubes) – Each ENVE SES wheelset is delivered with one roll of RED, model specific, ENVE tested and approved tubeless rim tape. This tape should be installed regardless of whether you intend to run your wheels tubeless or not. Do not run cloth or plastic (including ENVE) non-tubeless compatible rim tape or strips. Plastic rim strips and cloth tapes are too thick, bridge the drop-center rim channel, and will make installation and removal of tires extremely difficult. Click here for our tubeless tape installation video.
Cotton and/or Natural Fiber Sidewall Tires – ENVE does NOT RECOMMEND the use of cotton or natural fiber sidewall non-tubeless tires with ENVE SES wheelsets for EVERYDAY USE. These tires are intended for high-performance racing applications only. If you choose to run these tires, please inspect your tires after each ride for cuts, tears, and any signs of abrasion and/or wear in the sidewall and at the location of the rim/tire interface. If any wear and/or damage is identified, replace before riding. Riders who choose to run tires with cotton or natural fiber sidewalls do so at their own risk.
Clincher | Front | Rear | Wheelset |
---|---|---|---|
Rim Weight | 603g | 596g | 1199g |
ENVE Carbon | 769g | 901g | 1670g |
ENVE Alloy | 799g | 964g | 1763g |
King R45 | 799g | 930g | 1729g |
Tubular | Front | Rear | Wheelset |
---|---|---|---|
Rim Weight | 466g | 491g | 956g |
ENVE Carbon | 632g | 795g | 1427g |
ENVE Alloy | 662g | 858g | 1520g |
King R45 | 661g | 825g | 1486g |
Quick Specs | Front | Rear |
---|---|---|
Rim Depth | 71mm | 78mm |
Internal Rim Width | 19mm | 19mm |
External Rim Width | 29mm | 27.5mm |
Hole Count | 20 | 24 |
Effective Rim Diameter (ERD) | 516mm | 504mm |
Aero Optimized Tire Size | 25c | 25c |
Spoke Information* | Spoke Cross (Front/Rear) | Front Length (Radial) | Rear Length (NDS/DS) |
---|---|---|---|
ENVE Carbon | Radial/2X | 244mm | 246mm / 242mm |
ENVE Alloy | Radial/2X | 242mm | 244mm / 242mm |
DT180 / DT240 / DT350 | Radial/2X | 240mm | 242mm / 240mm |
Chris King R45 | Radial/2X | 240mm | 242mm / 238mm |
*This wheelset is built with Sapim CX Ray spokes. Those built before May 2018 may use a DT Swiss spoke equivalent. DT Swiss spoke heads are stamped "DT". |
When the race is against the wind and the clock the SES 7.8 is optimized for the task. By reducing the tradeoffs between aerodynamics, stability, weight, and stiffness, the SES 7.8 carbon fiber aero wheel is the perfect tool for road racing and triathlon alike. The SES 7.8 features asymmetric rim geometries front to back. The front rim is 71mm deep and 29mm wide while the rear rims is 80mm deep and 27.5 mm wide. The dissimilar rim geometries improve the efficiency of the airflow in the system of bike frame and wheels. Because running 25mm tires is now standard, the SES 7.8 was designed with larger tires in mind. Additionally, frame manufacturers are now producing frames that have more clearance between wheel and frame which has opened up the design scope for a wheelset. The SES 7.8 is optimized for these frames. In addition to changes in shape and structure, the SES 7.8 features the latest molded in carbon fiber brake track texture and is compatible with road tubeless tires. The SES 7.8 when built with the ENVE Carbon Road Hub comes in at a weight of 1562 grams making it a viable choice for courses that feature flat to hilly terrain.
Unfortunately you're using an unsupported browser version. For improved security, speed and the best experience please consider using the latest version of on the following browsers: Google Chrome, Firefox, Edge, Safari, or Opera.
There are no contributions yet.